5G 스펙트럼 분석기

가장 휴대성이 뛰어난 5G 셀 사이트 테스트 솔루션

5G SMART/5G PRO

5G SMART & 5G PRO, 5G 시리즈 스펙트럼 분석기는 ‘100MHz 실시간 분석’, ‘5G NR 변조 분석’, ‘빔포밍’ 등 약 30가지의 다양한 신호 분석 기능으로 5G 기지국 설치 및 유지보수에 필요한 모든 측정을 지원합니다.

5G SMART

5G PRO

Download for SW and marketing material

카달로그

제품 설명서

소프트웨어

The Most Portable Handheld Spectrum Analyzers

Used for maintaining or installing cell site transmitter systems, checking and assessing wireless telecommunications signal quality and service for outdoor applications

5G SMART

5G PRO

High visibility optimized
for working environment

10.1 inch capacitive touch display with LED backlight

GENERAL 5G PRO 5G SMART
Frequency Range 9 kHz to 43 GHz 9 kHz to 15 GHz
Frequency Span 100 MHz real-time 100 MHz real-time
9 kHz – 43 GHz swept 9 kHz – 15 GHz swept
Display 10.1″ 10.1″
Battery Operating Time ≥ 3 hours ≥ 3 hours
Weight ≤ 3.9 kg (include battery) ≤ 3.3 kg (include battery)

 

 

SPECTRUM MEASUREMENTS
Channel Power Total Channel Power (dBm), Bandwidth (MHz), PSD (dBm/Hz), Limit Test (Pass/Fail
test)
Occupied Bandwidth Occupied Power (%), Total Power (dBm), Occupied Bandwidth (MHz), X dB Power
(dB), X dB Bandwidth (MHz), Limit Test (Pass/Fail test)
Adjacent Channel Power Main / Adjacent / Alternate Channel Power (Absolute (dBm) / Relative (dBc)), Main
/ Adjacent / Alternate Channel Bandwidth (MHz)
Spectrum Emission mask Pre-defined Mask Setting, Limit Test (Pass/Fail test)
Spurious Emissions Frequency Range, Peak Power (dBm), Peak Frequency (MHz), Limit Test (Pass/Fail
test),
Gated Sweep Gate Delay, Gate Length, Trigger Source, Time View

 

 

LTE FDD/TDD MEASUREMENTS
Constellation RSRP, EVM RMS / Peak, Data EVM (QPSK,16QAM, 64QAM, 256QAM), Frequency
Offset (Hz, ppm), Time Offset (ns)
Data Channel RB Power Diagram, Constellation, Modulation Type, RB Power, EVM RMS / Peak, IQ
Offset (dB)
Control Channel P-SS, S-SS, PBCH, PCFICH, PHICH, PDCCH, RS Power (dBm), EMV (%), Modulation
Type, Frequency Offset
Power vs. Time Frame Average Power (dBm), Frequency Offset (Hz), OFDM Symbol Power (dBm),
IQ Offset (dB), EVM RMS / Peak, Data EVM RMS / Peak
OTA Channel Scanner, ID Scanner, Control Channel, Datagram
Carrier Aggregation Frequency, Bandwidth, Channel Power, RS Power, RS Delta Power, S-SS Power, EVM
RMS / Peak, Frequency Offset, Time Error, Cell ID of each Carrier Component
RF Analysis Channel Power, Occupied Bandwidth, Spectrum Emission Mask (SEM), Adjacent
Channel Leakage power Ratio (ACLR)

 

 

5G NR MEASUREMENTS
Channel Power Total Channel Power, Peak to Average Power Ratio, Total PSD, Limit Test
Occupied Bandwidth Occupied Bandwidth, Peak to Average Power Ratio, Total Power, xXdB Bandwidth,
Limit Test
Multi-Beam Analysis Physical Cell ID, Sector ID, Cell Group, Frequency Error, Time Offset, SS-RSRP (dBm),
SS-RSRQ (dB),
SS-SINR (dB), Sync and Demodulation
Status Indicators, Power (dBm)
Single-Beam Analysis Physical Cell ID, Sector ID, Cell Group, Frequency Error, Time Offset, SS-RSRP (dBm),
SS-RSRQ (dB),
SS-SINR (dB), Sync and Demodulation Status Indicators, Average EVM, Peak EVM
(@subcarrier/symbol), Power (dBm)
PCI Scanner Multiple PCI, Beam Index, SS-RSRP, SS-RSRQ, SS-SINR, SS-EVM of each Beam Ratio (ACLR)
EIRP Rx Antenna Gain, Rx Cable Loss, Distance, Path Loss, Max Hold Count, Channel
Bandwidth, EIRP, Max EIRP
Limit Test

 

 

REAL-TIME SPECTRUM MEASUREMENTS
Realtime Spectrogram Provides spectrum and spectrogram
Persistent Density Two-dimensional histogram that shows the statistical frequency of any frequency
and level combinations for every pixel on the display with a probability distribution
Persistent Spectrogram Combines persistent density and spectrogram display

SPECTRUM ANALYZER (SWEPT SA)

 

  • Standard option
  • Measurement accuracy of ± 0.5 dB (typical)
  • Wide dynamic range down to -160 dBm (typical)
  • Supports Channel power (CP), Occupied bandwidth (OBW), Spectrum emission mask (SEM), Adjacent channel power (ACP) and Transmitter spurious emissions

Spectrum analyzer mode

Channel power measurement

CHANNEL POWER (CP)

 

  • Standard option
  • Accurately measure the power of digitally modulated signals
  • Easier measurement setup and fast measurement per wireless telecommunication standards
  • Supports pass or fail limit test

SPECTRUM EMISSION MASK (SEM)

 

  • Standard option
  • Characterizing transmitting power from in-band and out-of-band emissions at specified frequency bandwidths and at specific offsets relative to the total carrier power
  • Supports pass or fail mask with absolute or relative limit lines

Occupied bandwidth measurement

Gated sweep setting window with finger gesture

GATED SWEEP (SPECTRUM ANALYZER)

 

  • Optional
  • Quickly detect pulses in the time and frequency domains using gate settings
  • Support periodic trigger synchronized with GPS to precisely capture 5G TDD signal to differentiate uplink and downlink signals

REAL-TIME SPECTRUM ANALYZER (RTSA)

 

  • Optional
  • Two-dimensional display that contains a line trace that shows the power levels for each frequency for a particular bandwidth or span with the horizontal and vertical axis representing frequency and amplitude
  • Detect signals as short as 18.6 μs (@100 MHz Span) with 100% POI with full amplitude accuracy
  • The spectrogram provides an easy way to monitor the changes of a signal’s frequency and amplitude over time. Typically, it is used for measurements in which time is a factor
  • The persistence spectrum is a three-dimensional histogram that shows the statistical frequency of any frequency and level combinations for every pixel on the display (‘hits’ per pixel)
  • The persistent spectrogram is a combination of spectrogram which is an easy way to monitor the changes of a signal’s frequency and amplitude over time and persistent density include how frequent a certain level and frequency combination has occurred during the measurement

Realtime spectrogram view

Persistent density view

Persistent spectrogram view

SIGNAL ANALYZERS

 

  • Optional
  • The signal analyzer mode is the ideal tool to verify and troubleshoot signal quality degradation
  • Supports LTE/LTE-A FDD/TDD RF analysis & Modulation analysis
  • Support 5G NR RF analysis & Beam analysis

5G NR Multi-beam measurement

5G NR Single-beam measurement

BEAM ANALYSIS FOR 5G NR

 

  • Optional (included in 5G NR Signal Analyzer option)
  • 5G NR signal analysis can measure P-SS, S-SS and decode cell ID, which are key parameters to verify 5G coverage
  • Detect and measure beam IDs and individual power level in Multi-beam and Single-beam measurement
  • Supporting a total of 8 beam IDs in a single page that can be measured at same time

PCI SCANNER FOR 5G NR

 

  • Optional (included in 5G NR Signal Analyzer option)
  • Quickly scan multiple Cell IDs, and provide the beam ID, signal strength of individual beam with the detected PCI.

5G NR PCI Scanner

LTE / LTE-A FDD & TDD WITH OTA MEASUREMENTS

 

  • Optional
  • Supports 3GPP based RF characterization such as Channel power (CP), Occupied bandwidth (OBW), Spectrum emission mask (SEM), and Adjacent channel power (ACP)
  • Demodulation measures and decodes cell ID, RSRP, RSRQ, RSSI, PSS, SSS, SINR and frequency error
  • Supports Carrier Aggregation

LTE/LTE-A SEM measurement

LTE/LTE-A constellation measurement

LTE/LTE-A control channel measurement

LTE /LTE-A carrier aggregation measurement

Web-based remote control

REMOTE CONTROL CAPABILITY (WEB-BASED)

 

  • Standard Option
  • Web-based, can be run on any devices without further installation of software (except instrument driver)
  • Monitor current connected instrument
  • Control the instrument remotely

BUILT-IN GPS

 

  • Standard Option
  • A built-in GPS receiver provides the measurement with time, latitude, longitude, and an external reference to improve frequency accuracy

USB KEYBOARD AND MOUSE SUPPORT

 

  • Standard Option
  • 5G-series spectrum analyzers support use of USB keyboards and mice to simplify the input of text

5G Smart

  • 9 kHz to 15 GHz frequency range
  • Ultra-light handheld spectrum analyzer
  • Support Over-the-air measurement for 5G NR and LTE signal analysis
  • Optimal performance for field use with full touch operation

 

5G Pro

  • 9 kHz to 43 GHz frequency range
  • Continuous frequency support for FR1 & FR2 5G NR bands
  • Ideal for field use due to its high performance, ruggedized design and long battery operating time
  • Support Over-the-air measurement for 5G NR and LTE signal analysis
  • Optimal performance for field use with full touch operation

Let’s Stay Connected!

최신 네트워크 및 계측, 모니터링 등 분석 뉴스 받기!